The DG-2plus is an upgrade of our original, compact digital ohmmeter. Still capable of safely measuring live bridgewire and firing line resistance from 9.99K ohms (3 auto-ranges: 1.0 to 9.9 Ohms; 10 to 999 Ohms; and 1.00K to 9.99K) – but now self-calibrates at every Power-On. Instantly know if your EBCs and firing lines are good, with the new, triple, high-accuracy, digital measuring circuits that display results in real time. Housed in a non-sparking enclosure (including brass contacts) and completely sealed, it is safe for flammable atmospheres.
Haptic under Digital Ohmmeter Load Range Stemming Mode Type Life Temperature Range -4º to 140ºF (-20º to 60ºC) Current Draw Fuse Protected Non-Sparking Precise Ingress Protection Dimensions Weight Material Colors Safety Reduces battery drain during continual stemming tests Lifetime Warranty Against Manufacturing Defects Operation Enclosure The ORIGINAL, and ONLY Haptic, Digital, Blaster's Ohmmeter! Resistance is displayed over three ranges: 1.0 to 9.9 Ohms; 10 to 999 Ohms; and 1.99K to 9.99K Ohms. Testing circuit protected by fast-blow, 50mA fuse (max. allowed by MSHA) ABS Case, with Stainless Steel test contacts Power Source 1x Panasonic CR2477 ~15,000 2 sec. tests, ~1.5yrs (User replaceable) Information is subject to change without notice. Less than 1 ounce (28.4g) IP65 compliant against dust and water spray; not submersible 1.9” wide x 3.5” long x 1.2” thick (8.9 cm x 16.5 cm x 3 cm) Non-sparking brass test contacts, and sealed ABS enclosure are suitabe for flammable atmospheres. High-tolerance calibration circuit self-calibrates every time at power-up. Testing circuit has a max. current of 1.75mA max The 3-Digit LED display indicates actual load resistance, while a quick, underlying haptic response indicates initial continuity. Measures from 1.0 to 9.99K Ohms Charcoal grey ABS enclosure with yellow rubber boot
