WIFI Wireless Transceiver Module for Arduino Raspberry Pi ESP8266 Relay with ESP8266 ESP-01S Serial

WIFI Wireless Transceiver Module for Arduino Raspberry Pi ESP8266 Relay with ESP8266 ESP-01S Serial

(No reviews yet) Leave a Review
$9.50
Part #:
3126
Shipping:
Calculated at Checkout
  • ESP-01s is the latest version with 1MB Flash Memory, upgraded from 512KB. It’s an improved version of ESP-01, optimized circuit and wiring to improve WIFI radio performance.
  • ESP-01s run LWIP Protocol internally, which support three modes: AP, STA, AP + STA coexistence mode.
  • This ESP-01/01S Relay based on ESP-01/01S WIFI module. It is designed for smart home, internet and other DIY projects. With this smart relay, it is easy to DIY your smart switch to control any device by your phone anywhere.
  • Transmission distance: the maximum transmission distance of 400m (open environment, mobile phone equipped with WIFI module)

Feature:
This ESP-01/01S Relay based on ESP-01/01S WIFI module. It is designed for smart home, internet and other DIY projects. With this smart relay, it is easy to DIY your smart switch to control any device by your phone anywhere.

Parameter
1.Working voltage: DC5V-9V
2.Working current: ≥250mA
3.Transmission distance: the maximum distance of 400m (open environment)
4.Load: 10A/250VAC 10A/30VDC, the relay pulls 100,000 times
5.Product size: 37 * 25mm

How to use
1.Download the firmware to ESP-01/01S via USB-Serial adapter. The link to download the files: https://github.com/IOT-MCU/ESP-01S-Relay-v4.0
2. Plug the ESP-01S module to the 2*4 pin header after download the code to ESP-01/01S.
3. Connect a DC 5V-9V power to the GND and VCC.
4.Install ESP8266_Controller.apk on your Android phone.
5.Connect the mobile phone network to the hotspot sent by ESP-01/01S: ESP8266_XXX, password is: 12345678
6.Set the IP Address, the default IP is: 192.168.1.1
7.Click GPIO 0 ON OFF to control.

Package Included:
1 x ESP8266 Relais Adapter
1 x ESP8266 ESP-01S Module

You may also like