Item# 5762
The IP Wildcat Disrupter is a breech loaded, 12 gauge system that can accept up to 3-1/2 fired rounds. Velocities up to 3650 feet per second for specific rounds.
The Wildcat Disrupter is shock tube initiated and percussion actuated. It has a floating firing pin. This pin and spring is different from the Original PAN Disrupter breech.
LARGE water volume of 140ml to maximize disruption (Velocity of 1450 feet per second).
It is constructed of high grade stainless steel, capable of withstanding chamber pressures of at least 20,000 psi and has been tested by L-Tech Enterprises. Ideal Products, Inc. will fully warranty this disrupter, just as we do with all our disrupters, including the PAN and the T3 disrupters.
Two or more targets inside the bomb can be impacted with an isochronicity of 500 microseconds of each other.
The Wildcat Disrupter has 24 barrel. It will clamp into the same clamps and mounts as an Original PAN or T3 disrupter. This disrupter has ACME threads. The best advantage of the ACME threads is they will not lock onto the barrel and they only require 5 revolutions to fully attach the breech cap onto the barrel. The Original PAN requires 16 revolutions.
The Wildcat Disrupter is made of a different stainless steel, and uses the much improved push lock shock tube breech cap and plug assembly. The barrel is the same length, but has a 30mm section for additional mounting for off the shelf scope mounts and accessories.
The Wildcat Disrupter comes with the same configurations in units and kits as our other disrupters.
non-returnable item</span
