Item # 5036
Mechanical
Size
3"W x 2"D x 9"H
(7.6cm W x 5.8cm D x 22.8cm H)
Weight 36 oz. (1.02kg)
Operation:
2 Ohm Electric Detonators
2 Ohm Electric Detonators
Firing Capacity:
7 Series of 70
10 Series of 50
12 Series of 40
12 Series of 30
1 Series of 100
2 Ohm Electric Detonators
2 Ohm Electric Detonators
2 Ohm Electric Detonators
2 Ohm Electric Detonators
2 Ohm Electric Detonators
Never use a damaged or questionable machine. EIT Corporation repairs all units which it produces.
Output oscillographs are recorded for every machine. If a copy of these test traces is required please contact EIT Corporation.
Ready Indicator HV Neon
Charge/Fire Cycle 10
12 seconds
To Test:
Always check blasting circuit with an appropriate for blasting test device prior to connecting to Blasting Machine. Before connecting to blasting
circuit, depress rocker switch to the CHARGE position until READY light illuminates with a bright and even luminescence. Relax pressure on
the CHARGE position and quickly move rocker switch to the DETONATE position. READY light should extinguish immediatlely.
When READY light fails to illuminate within 20 seconds replace the 4 D cell batteries accessible through the battery cover located on the
back of the machine.
To Fire:
Connect Blasting Machine to blasting circuit and repeat CHARGE and DETONATE sequence as in To Test.
All blasting machine purchases will require an End User Certificate (PDF) and you may also be asked for a copy of your credentials, if not already on file.
