Push lock plug for the breech caps 1111 (PAN thread) and 4340 (ACME thread)
Comes assembled with all of the internal parts (4350PLT has no internal parts for the user to assemble themselves)
Push lock plug works in PAN thread breech and ACME breech and can use the same firing pin and spring from original PAN breeches
Uses a push lock fitting to hold the shock tube, simply push the shock tube in until it bottoms out completely (there is a step in the fitting, push past the step), to release hold down on the ring on the top of the fitting and pull the shock tube out
This breech plug comes assembled to fit 1/8in (0.125in/3.2mm) shock tube but can also accept the fittings for the 4mm (0.158in) (4351M) and Mini (.085in/2.2mm) (4352) shock tube
Breech plug screws in to the breech cap to screw on to the disrupter, fits in bot the PAN thread cap (1111) or ACME thread cap (4340), can be ordered with the cap as a kit for the PAN thread (K1111PL) or the ACME thread (K4340PL) or separate
Thread design for screwing in to the cap is so that a pyrotechnic pencil may be used in place of the plug to fire the breech
For the ferrule nut style with all of the original PAN breech parts see K4350
